Flat pack furniture assembly in Aylesbury
Flat pack assembly in Aylesbury at fixed prices, packaging taken away, and the wall strap fitted as standard.
Somebody has to build it. If you would rather it was not you, that is what I am for. I am Richard, I have been doing this around Aylesbury for twenty years, and most items are a fixed price.
If you’ve had a whole delivery arrive, tell me the lot and I’ll price the job rather than the clock. A bedroom’s worth in one visit works out well below three separate call-outs.
Flat pack furniture I assemble
- Bookcases, shelving and small units
- Chests of drawers and bedside tables
- Bed frames
- Desks and dining tables
- Wardrobes, including sliding-door and modular runs
- Corner units
- Garden kits: sheds, greenhouses and arbour seats
- Anything you’ve already started and got stuck on
What I charge
Most items are a fixed price, so you know the cost before I turn up:
- Bookcase or small unit — £60
- Chest of drawers — £80
- Bed frame — £60 single, £80 double
- Desk or dining table — £60
- 2-door wardrobe — £90
- 3-door wardrobe — £120
- Sliding-door or modular wardrobe run — from £160
Mixed or odd jobs are £40 an hour. Jobs of an hour or less are £60 including a £20 call-out. Over an hour, just £40 an hour with no call-out.
I take the packaging away with me. That’s not an extra — it’s the bit people forget about until there’s a wardrobe’s worth of cardboard in the hallway and the recycling lorry isn’t due until a week on Tuesday.
How that compares: Checkatrade’s IKEA assembly cost guide puts most items at £15–£90 and wardrobes at £45–£90. Fantastic Services’ 2026 UK price guide puts wardrobe assembly at £60–£120 outside London, and £45–£65 an hour in London and the South East. Taskrabbit’s November 2026 guide puts the average assembly job in Milton Keynes at £126.
Flat pack is only part of what I do. See my other handyman services, or read about my first Checkatrade job: an oak desk and a staircase. I cover Aylesbury and nearby villages including Aston Clinton and Wendover. To book, get in touch or call 07723 966130.
A few I’ve built
Good to know
What actually goes wrong
Flat-pack isn’t difficult so much as unforgiving. Nearly every job I’m called out to rescue went wrong in one of four ways.
Cam locks over-tightened. That’s the round metal disc that pulls the peg in. A quarter-turn past snug and it chews out the chipboard around it, and that fixing will never hold properly again. There’s no undo.
The back panel on the wrong way round, or fitted last. That thin hardboard sheet is what stops the whole carcass racking into a parallelogram. On most units it has to go in before you stand the thing up, which means catching it three steps earlier than you’d think.
Wardrobes built flat on the floor. A tall wardrobe assembled lying down often cannot be stood up again — it won’t clear the ceiling, or it twists as it goes and the doors never sit right afterwards. It has to be built standing, in its final position, which is a two-person job if you want it square.
A missing or damaged part found at step 30. By which point everything is half-built and in the way. I carry the common fixings, cams, dowels, shelf pins and the like, so a missing bag of screws doesn’t turn into a fortnight’s wait and a part-built wardrobe in the spare room.
The strap in the bottom of the box
Almost every tall chest of drawers and wardrobe comes with a restraint strap or bracket to fix it to the wall. It is in the box. Hardly anyone fits it.
It’s there because children climb drawers — pull two out and a loaded chest will go over, and furniture tip-overs injure and kill children every year. An empty drawer unit that feels perfectly stable on the showroom floor behaves very differently once it’s full and a three-year-old is using it as a ladder.
I fit the restraint as standard, and because I do the rest of my work on walls, I’ll use a fixing that suits what you’ve actually got — a plasterboard anchor into stud, or a proper plug into masonry. That matters: a restraint screwed into bare plasterboard with the plug that came in the box will pull straight out under exactly the load it exists to resist.
If you’d rather it wasn’t fitted, that’s your call and I’ll leave it — but I’ll always ask.
Taking it apart and putting it back
Moving house is where flat-pack really shows its limits. Some of it dismantles and rebuilds perfectly well. Some of it is designed to be assembled exactly once, and will come apart but never go back together with the same strength.
I’ll tell you honestly which is which before we start, because it’s cheaper to know in advance than to find out in your new living room. Where a piece won’t survive the move, I’d sooner say so than take your money twice.
Should you just do it yourself?
Plenty of it you should. A bookcase, a bedside table, a simple desk — put an hour aside, lay the parts out, read the whole instruction sheet before you pick up a screwdriver, and you’ll be fine. I’d rather tell you that than charge you £60 for something you’d enjoy doing.
Where it’s worth calling me: tall wardrobes, anything with sliding doors, modular runs that have to line up across a wall, corner units, and anything you’ve already started and got stuck on. Also anything heavy going up stairs, which is less about skill than about not doing your back in.
Why me rather than a national booking app
You get me, not whoever the app assigned this morning. I’ll tell you on the phone roughly what it’ll cost and how long it’ll take, I turn up when I said I would, and I clear up and take the cardboard with me. Twenty years in the trade means I’ve built most of it before, and the things that go wrong I’ve already seen go wrong.
Rated 9.9/10 on Checkatrade. Read my reviews on Checkatrade



