By Richard Anslow, TradesPro, Aylesbury
I was recently asked to look at some upstairs rooms in a local house where mould kept coming back on the walls and ceilings. The family were worried there was something wrong with the building itself. Here’s how I worked out what was going on, and how we fixed it.
[PHOTO: mould on the walls/ceiling before work]
Is it the building, or how the house is being lived in?
Before I even visited, I explained my approach. I’d bring my damp meter and take readings on the walls where the mould was.
- If the walls read dry but there’s still mould, the building isn’t the problem. It’s condensation: warm, moist air hitting cold walls and forming a dew point, which is exactly where mould grows.
- If the readings are high, we’ve got a building problem, and we start looking at gutters, the roof, and so on.
In this case, the walls were bone dry. Condensation, as I’d expected.
[PHOTO: damp meter reading on the wall]
Warm, but ventilated
I always try to explain this gently, because it can feel personal. The fixes are simple, but they can seem backwards in winter:
- Keep trickle vents open on the windows.
- Open windows a little, even when it’s cold, so more air moves through.
- Keep the heating on and steady. Houses that swing between warm and cold suffer much more.
Warm and ventilated. That’s the balance.
Treating the mould
Painting over live mould is a waste of money. First, I treat it with a dedicated mould spray (chlorine based, so wear gloves and keep the room ventilated). Spray it on, leave the room, shut the door, and give it around 20 minutes to kill the spores before wiping it off.
Safety note: never mix chlorine-based mould sprays or bleach with anything containing ammonia.
Blocking the stains
Even dead mould can leave marks that bleed through fresh paint. So next I seal the area with Zinsser B-I-N, a shellac-based primer and stain blocker that I’ve trusted for years.
[PHOTO: stain block applied]
Trying Zinsser’s mould-resistant paint
The customer asked whether there was a better paint for the problem rooms. I looked into it and suggested Zinsser Perma-White Interior Matt, an anti-mould paint, tinted to colour and bought from Brewers. The staff at Brewers are always friendly, helpful and really knowledgeable, and it’s a pleasant place to shop. Zinsser says the paint prevents mould and mildew for up to 7 years as part of a two-coat system. It was my first time using it, so here are my honest first impressions:
- It looks thin in the tin. My first thought was that it’d be like water. It isn’t.
- Coverage was excellent. Easily as good as Dulux, in my view. We went from magnolia to a light blue and were happy with two coats.
- Nice to paint with, similar in feel to a good trade emulsion like Johnstone’s.
- Fully wipeable, with a matt finish.
- It’s not cheap, so we used it only upstairs, where the problem was. Downstairs gets a standard emulsion colour-matched.
[PHOTO: finished room in light blue]
The honest bit
Good paint helps, but it doesn’t cure condensation on its own. Ventilation and steady heating do the real work. I’ll be checking back with this customer over the coming year to see how it holds up, and I’ll update this post with what I find.
Got mould coming back?
If you’re in or around Aylesbury and keep getting mould, I’m happy to come and take readings and tell you honestly whether it’s the building or condensation. Get in touch with TradesPro.